Quality Medical Inc.
4829 S. Kirk Way.
Aurora, CO 80015
1-877-878-9882
1-800-846-7609 - Fax

Online Payments


 


Back to Cast Accessories

How To Get Measurements for the
Dry Pro Waterproof Cast Cover

1) MEASURE LENGTH

ARM: Measure from the tip of the middle finger to the top end of the cast or prosthetic. If the cast goes above the elbow, follow the bend of the arm.

LEG: Measure from the back of the heel (from the floor) to the top end of the cast or prosthetic.

Choose a Dry Pro waterproof cast cover that is at least 2 inches LONGER than your measurement.

Don't worry if the Dry Pro waterproof cast cover is too long. The excess material of the cast sock will flatten down when the air is pumped out.

2) MEASURE OPENING

ARM: Measure the circumference of the arm just above the cast or bandage
(If the end of the cast is very close to the elbow, measure mid bicep.)

LEG: Measure the circumference of the leg just above the cast or bandage
(If the end of the cast is very close to the knee, measure mid thigh.)


The circumference measurment is very important for proper sizing, excess length will be removed by the vaccum. Choose a cast protector with enough length and the circumference within the range of your measurement.
Measure around the skin and not the cast!


Get professional help with sizing and our protectors are in stock and ready to ship.
Just call 1-877-878-9882

Waterproof Cast Protector Dry Pro Cast Protectors - In Stock & Lowest Price

The Stay Dry Pro Pump is Completely Watertight. Keeping your Bandages, Prosthesis, and Casts Dry. The Stay Dry Pro-Pump is a surgical latex sleeve that fits over a cast to offer complete waterproof protection. Its patented vacuum seal assures that a cast will stay dry, even when submerged in water. With the Stay Dry Pro-Pump , patients can go swimming, bathe, shower and receive hydrotherapy. The Stay Dry Pro-Pump is the world's only true waterproof body protection!
You must follow the measurement instructions correctly for a proper fit and seal!!
Same Day shipping on orders placed by 12pm MST
Overnight Delivery Available!!
1-3 Day Ground Delivery!!
(Delivery to most Continental U.S. destinations.)
Waterproof Cast Cover
Click here for measurement instructions: (Measurement Instructions)
Click here to learn how to use the Dry Pro Cast Protector: (How to Use)
Click here for common FAQ’s about Dry Pro: (FAQ)


Note - Do not leave on for extended periods of time. We recommend removing it after every 45 minutes of use. Do not use in vascular compromised patients. Steady yourself in wet slippery areas. The Dry Pro cast and bandage protector contains natural rubber latex, which may cause allergic reactions. Always follow your doctor's advice. We sell only new items, cast protectors are non-returnable, please measure carefully!

Don't worry if the Dry Pro waterproof cast cover is too long. The excess material of the cast sock will flatten down when the air is pumped out.
Choose a cast protector with enough length and the circumference within the range of your measurement.
Measure around the skin and not the cast!
Stay Dry Pro Pump Arm
Stay Dry Pro Pump Leg


  Product Type:

 Circumference:

Inches
(For Example: 7 or 13.5)

 Length:

Inches
(For Example: 15 or 31.5)

 

Enter Your Measurements Into Our Size Calculator
After you've taken the measurements as shown below, plug them into the size calculator which will generate the correct product for you to purchase.


Arm/ Leg Circumference Measurement 
how to measure dry pro
Measure the circumference of the Arm or Leg right above the cast. (If the end of the cast it very close to the elbow, measure mid bicep or measure mid thigh). 
(DO NOT MEASURE AROUND THE CAST -- MEASURE AROUND THE SKIN)

Arm/ Leg Length Measurement
measure length for dry pro
Measure from the tip of middle finger (or the bottom of the heel) to top end of cast. It is OK if the cast protector measurement is longer then the limb measurement, the protector will still work. Extra length will be removed when the vacuum seal is created.

 

 According to the measurements you entered, we recommend:

 Product Number:

Dry Pro Cast Protector – Full Arm(X-Small) - SKU QMFA-12
Length - 16 in (40 cm) Arm Circumference - 6-6.75 inches

$ 35.95
No Longer Available
Dry Pro Cast Protector – Full Arm(Small) - SKU QMFA-14
Length - 23 in (58 cm) Arm Circumference - 6.75-8.75 inches
$ 36.95
Dry Pro Cast Protector – Full Arm(Medium) - SKU QMFA-16
Length - 28 in (71 cm) Arm Circumference - 8.75-10 inches
$ 37.95
No Longer Available
Dry Pro Cast Protector – Full Arm(Large) - SKU QMFA-18
Length - 31.5 in (80 cm) Arm Circumference - 10 inches and up
$ 39.95
Dry Pro Cast Protector – Half Arm(Small) - SKU QMHA-13
Length - 17.25 in (43 cm) Arm Circumference - 7.75-10 inches
$ 37.95
No Longer Available
Dry Pro Cast Protector – Half Arm - SKU QMHA-15
Length - 20 in (51 cm) Arm Circumference - 10 inches and up
$ 38.95
No Longer Available

Dry Pro Cast Protector – Full Leg(X-Small) - SKU QMFL-12
Length - 19 in (48 cm) Leg Circumference -7.5-11 inches
$ 36.95
Dry Pro Cast Protector – Full Leg(Small) - SKU QMFL-14
Length - 29 in (73 cm) Leg Circumference - 14-16.5 inches
$ 37.95
No Longer Available
Dry Pro Cast Protector – Full Leg(Medium) - SKU QMFL-16
Length - 32.5 in (82 cm) Leg Circumference - 16.5-21 inches
$ 38.95
Dry Pro Cast Protector – Full Leg(Large) - SKU QMFL-18
Length - 37 in (94 cm) Leg Circumference - 21 inches and up
$ 40.95
No Longer Available
Dry Pro Cast Protector – Half Leg(Small) - SKU QMHL-13
Length - 21in (53cm) Leg Circumference - 10-13 inches
$ 37.95
No Longer Available
Dry Pro Cast Protector – Half Leg(Large) - SKU QMHL-15
Length - 23.5 in (59 cm) Leg Circumference - 13 inches and up
$ 38.95
No Longer Available

Specifications:Package size is 1 each.
This item is warrantied by the manufacturer.